The 120×120 mm Douglas post, 2.50 m, fine-sawn, is meant as a stiffer upright when you build a shelter, cart shed or veranda at a normal head height. The 12×12 cm section carries more than 100×100 mm and looks heavier. At 2.50 m on adjustable piers you usually need little offcut. European Douglas is typically class 3 untreated. Fine-sawn face. No herkomst claim on this article. Order or collect at Jan Sok in Meppel.

Key features

Key features:

• 120×120 mm section: Extra capacity and a heavier look.
• 2.50 m length: Matches common pier-mounted upright height with little waste.
• Fine-sawn: Light-sawn, rural face.
• Durability class approx. 3: Indicative above ground.
• Colour: Warm orange-brown, weathers to even silver if left untreated.

Applications

Applications:

• Posts for pergolas, verandas and carports
• Fence and screen posts
• Heavier gate posts and main uprights
• Visible garden timber work
• Collect or deliver via Jan Sok

Suitable substrates

Use and notes:

• Concrete piers / adjustable feet: keep the post off wet soil
• Steel post shoes on paving or concrete
• In-ground only with extra below-grade protection — ask for advice
• Allow movement; pre-drill heavy fasteners

Instructions for use

Working notes:

1. Check: Section and length on receipt.
2. Set: Plumb on pier or shoe; keep clear of standing water.
3. Fix: Pre-drill; use outdoor screws or coach screws.
4. Seal: End-grain sealer on cut ends.
5. Finish: Leave to grey or apply breathable Douglas stain/oil.

Product specifications

Specifications: