Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | acrylonitril-butadieen-styreen |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
The ABS universal trap Ø40 is intended for the wastes in the home that handle a bit more water, such as a shower, washing machine, washbasin or kitchen unit. You fit this grey ABS plastic trap permanently into the 40 mm waste pipe. It has an inlet with a collar, a solvent-weld socket for the outlet and a screw cap that serves as a clean-out cap. The water seal in the body prevents sewer odours from entering the home via the waste. At a washing machine connection or shower, a lot of water with soap residue and hair passes through the trap in a short time. Because you can open the cap, you can easily remove that dirt. If the cap leaks, replace the separate cap seal ring Ø40 instead of the whole trap. Order the trap online for delivery across the Netherlands, or collect it directly from Houthandel Jan Sok in Meppel.
Key features
- Diameter Ø40 mm: the standard size for a shower, washing machine and washbasin.
- Unblocking via the cap: screw cap on top makes cleaning easy.
- Collar and solvent-weld socket: inlet with collar, outlet side to solvent-weld onto PVC Ø40 mm.
- Spare parts available separately: cap seal ring and collar piece Ø40 can be replaced separately.
- Grey ABS: matches grey PVC waste material.
Applications
Widely used for:
- Washing machine and dishwasher connections.
- Shower trays and shower channels with a 40 mm waste.
- Washbasins and bathroom vanity units.
- Kitchen wastes in a home with 40 mm pipework.
Combine with
Matching materials:
- PVC waste pipe Ø40 mm.
- Cap seal ring Ø40 as a spare seal for the screw cap.
- Collar piece Ø40 as a replacement part for the inlet.
- PVC bends Ø40 mm to run to the soil stack.
Fitting
- Choose the spot: fit the trap under or right next to the fixture and keep the cap accessible.
- Sawing: saw the 40 mm pipe square and deburr the inside and outside.
- Clean and solvent-weld: degrease with PVC cleaner, solvent-weld pipe and socket and hold the joint for a few seconds.
- Connect the inlet: connect the waste of the shower, washbasin or washing machine to the collar.
- Check the seal: screw the cap with cap seal ring on hand-tight and test for leaks.
Product specifications
| Property | Value |
|---|---|
| Diameter | Ø40 mm |
| Material | ABS |
| Colour | grey |
| Connections | collar and solvent-weld socket |
| Unblocking | via screw cap |
| Volume | 1 piece |
For beginners
Beginner
This trap makes sure no sewer odours come out of your shower, washbasin or washing machine waste. It fits 40 mm waste pipe. Choose a spot where you can unscrew the cap later to clean it.
- Tools
- Pipe cutter or fine-toothed saw
- Deburrer
- PVC cleaner and solvent cement
- Tape measure
- Also needed
- pvc-afvoerbuis-40-200m
- dekselring-40
- kraagstuk-universele-sifon-40
- pvc-bocht-45-graden-40-mof-spie
- How to calculate
- You buy this per piece.
- Common mistake
- The cap is overtightened with pliers, which deforms the cap seal ring so that it starts to leak. Only tighten the cap hand-tight.
ABS universal trap Ø40
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
Can I use a universal trap Ø40 for my washing machine?
Yes, 40 mm is a common waste size for a washing machine. The trap prevents odour nuisance and can be cleaned via the cap.
My trap leaks at the cap, what now?
Replace the cap seal ring Ø40. That little rubber ring seals the screw cap and is available separately.
Is ABS the same as PVC?
No, ABS is a different plastic, but the trap is made to connect to grey PVC waste pipe. For solvent welding, use a cement that is suitable for the combination.