Click the image to see the section size and grain
| Brand | Prolock |
|---|---|
| Finish | Afdekdop |
| Material | Kunststof |
| Thickness | 100mm |
| Width | 120mm |
| Length | 0,12m |
| Stock | 476 in stock |
Product description
The Prolock Sigma end cap (afdekdop) is the plastic cap that finishes your Prolock Sigma retaining wall. It closes the open end where the top cover (afdeksloof) stops. A straight wall needs two: one at the start and one at the end. You fit it last, once posts, panels and top cover are in place.
Key features
What the end cap does for your wall:
- Neat finish: the open profile at the end of the wall is closed and looks finished.
- Less dirt in the profile: leaves, sand and dirt stay out of the open end.
- Made for Prolock Sigma: sized at roughly 12 cm to match the Sigma profile.
- Maintenance-free: plastic does not rot and never needs paint or oil.
Applications
Use the end cap for:
- The start and end of a Prolock Sigma retaining wall along a ditch, canal or pond
- Every open end of a wall that continues around corner profiles
- Garden retaining walls or level changes built with Prolock Sigma panels and top cover
- Replacing a lost or damaged cap on an existing Prolock wall
What to check
Before you order:
- Count your open ends: two caps for a straight wall, only the free ends with corner profiles.
- Made for Prolock Sigma only; not guaranteed to fit other sheet piling.
- The cap belongs with the top cover. Without a top cover you do not need it.
- Order them with your panels, posts and top cover so nothing is missing when you finish.
How to fit the end cap
The cap is the final step of your retaining wall:
- Finish the wall: set posts and panels first, then fit the top cover along the upper edge.
- Square the end: if you shorten the top cover, cut it square so the cap closes properly.
- Clean: remove sand and sawdust from the open end.
- Fit the cap: place the cap on the open end so it closes flush.
- Check: during your yearly walk along the wall, check the caps are still secure.
Product specifications
Specifications:
| Property | Value |
|---|---|
| System | Prolock Sigma plastic retaining wall |
| Type | End cap for top cover |
| Material | Plastic |
| Size | Approx. 12 cm (0.12 m) |
| Quantity needed | 2 per straight wall (start and end) |
| SKU | JS00468 |
Technical characteristics
- Application
- Bank protection
Cover cap Prolock Sigma plastic
Delivery and pickup
-
Parcel: € 12,50 for pieces up to 1.76 m
-
Pickup in Meppel: Free (ready after confirmation)
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
What is an end cap for Prolock Sigma retaining walls used for?
The end cap closes off the open end of your Prolock Sigma retaining wall, where the top cover (afdeksloof) stops. It gives the start and end of the wall a neat, closed finish instead of an open profile.
How many end caps do I need?
A straight wall needs two: one for the start and one for the end. If your wall continues around corner profiles, only count the ends that stay open. Every open end gets one cap.
Do I really need an end cap?
The wall holds without one, but the profile stays open at the end. Leaves and dirt collect there easily and it looks unfinished. A couple of caps per wall gives you a cleanly finished retaining wall.
Does this end cap fit other plastic sheet piling?
It is made for the Prolock Sigma system, sized at roughly 12 cm to match the Sigma profile. It is not guaranteed to fit sheet piling of another brand or profile. Not sure? Send us a photo or the brand name when you get in touch.
When do I fit the end cap?
Last. First set the posts and slide the panels in between, then fit the top cover along the upper edge. Once everything is at height and level, put the caps on the open ends.
What is the end cap made of and does it need maintenance?
The end cap is plastic, like the rest of the Prolock Sigma system. It does not rot and never needs paint or oil. A quick rinse when algae or dirt builds up is enough.