Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | polyvinylchloride |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
The PVC end cap Ø50 permanently seals off a 50 mm waste pipe. A 50 mm pipe is widely used for the kitchen waste and as a collector pipe that several appliances connect to. At the start of such a collector pipe, or on a redundant kitchen connection, you bond this cap over the pipe end. When a kitchen is redesigned, the sink often moves, making the old waste redundant. Do not leave such a section open in the floor or wall; cut it back short and bond a cap on it. A tip for the start of a collector pipe: fit an accessible rodding eye there instead, because kitchen wastes in particular slowly silt up with grease. For a branch that is permanently sealed, this cap is the neat solution. Order online for delivery across the Netherlands or collect the cap from our timber yard in Meppel.
Key features
- Diameter Ø50 mm: for kitchen wastes and collector pipes.
- Over the pipe: the cap fits over the smooth pipe end.
- Bonded: permanently sealed against water and sewer smells.
- PVC: the same material as the waste pipe.
Applications
Suitable for, among other things:
- Redundant kitchen waste after moving the sink.
- End of a collector pipe that is not being extended further.
- Disconnected branch of a 50 mm pipe in the crawl space.
- Capping off a branch on a 50 mm tee.
Fits on
The end cap is bonded over a smooth 50 mm pipe end:
- PVC waste pipe Ø50 mm.
- The spigot end of PVC fittings Ø50 mm.
- A length of 50 mm pipe in the branch of a tee.
Installation
- Cut the pipe: saw the pipe end square to the required length.
- Deburr: remove burrs and lightly chamfer the outer edge.
- Degrease: clean the pipe end and the inside of the cap with PVC cleaner.
- Bond: apply PVC solvent cement to the pipe end and cap and push the cap on in one movement up to the stop.
- Cure: wipe away excess cement and only load or test the pipe after the drying time stated on the cement packaging.
Product specifications
| Property | Value |
|---|---|
| Material | PVC |
| Diameter | Ø50 mm |
| Connection | solvent weld socket, fits over the pipe |
| Sales unit | 1 piece |
| Volume | 1 piece |
For beginners
Intermediate
With this cap you permanently seal off a 50 mm waste pipe, for example the old kitchen waste. You bond it over the end of the pipe. Make sure the pipe end is clean and dry.
- Tools
- PVC cleaner and a clean cloth
- PVC solvent cement with brush
- Fine-toothed saw or pipe cutter
- File or deburring tool
- Also needed
- pvc-afvoerbuis-50-200m
- pvc-t-stuk-90-graden-50-3x-mof
- pe-speciedeksel-50
- How to calculate
- You buy the end cap per piece.
- Common mistake
- Bonding a cap straight into a socket does not work: this cap goes over a pipe. First bond a short length of pipe into the socket.
PVC end cap Ø50
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
How do I permanently seal off a 50 mm kitchen waste?
With a PVC end cap Ø50 that you bond over the pipe end, after degreasing the pipe and cap.
Can I fit an end cap on a 50 mm tee?
Yes, first bond a short length of 50 mm pipe into the socket of the tee and then bond the end cap over it.
Is a bonded end cap odour-tight?
Yes, a properly bonded PVC joint is watertight and odour-tight.