Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | polyvinylchloride |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
The 125 mm PVC half-round gutter end outlet left closes off the left-hand end of a 125 mm half-round gutter and at the same time has an outlet to the downpipe. You choose this grey part when the downpipe goes on the left-hand corner of the wall, seen from outside. The end piece follows the round gutter profile with the beaded edge. With an end outlet the downpipe sits neatly on the corner of the building and you do not need to make a hole in the gutter. The whole gutter run is then given a slight fall to the left. On a long wall you can also fit an end outlet at both ends, with a left-hand and a right-hand version; the gutter then falls from the middle towards both sides. Check which downpipe you are going to connect before ordering. At Houthandel Jan Sok in Meppel you order this end outlet online, for collection at Celsius 10 or delivery across the Netherlands.
Key features
- Stop end with outlet: closes off the gutter and carries the water to the downpipe.
- Left-hand version: for the left-hand gutter end, seen from outside.
- Half-round gutter profile: fits the round 125 mm half-round gutter.
- Grey PVC: rustproof, matches the rest of the range.
Applications
Suitable for, among other things:
- Downpipe on the left-hand corner of a house, garage or shed.
- Half-round gutters that drain entirely to the left.
- Long walls with an end outlet at both ends.
Connects to
- PVC half-round gutter 125 mm.
- A PVC downpipe on the underside of the outlet.
- Half-round gutter stop end right or end outlet right 125 mm at the other end.
Installation
- Fall: fit the half-round gutter brackets with a slight fall to the left.
- Cutting: cut the gutter square to length and deburr.
- Degreasing: clean the joint surfaces with PVC cleaner.
- Fitting: fit the end outlet according to the system's connection method, pressed fully home around the bead.
- Downpipe: connect the downpipe and fix it to the wall.
Product specifications
| Property | Value |
|---|---|
| Type | Half-round gutter end outlet |
| Version | Left |
| Gutter size | 125 mm |
| Material | PVC |
| Colour | Grey |
| Volume | 1 piece |
For beginners
Intermediate
This part closes off the left-hand side of your half-round gutter and has an opening to the downpipe. Choose it if your downpipe goes on the left-hand corner.
- Tools
- Fine-tooth saw
- Spirit level or bricklayer's line
- Deburring tool
- PVC cleaner
- Cordless drill
- Also needed
- pvc-kraalgoot-125mm-400m
- pvc-kraalgoot-eindstuk-rechts-125mm
- gegalvaniseerde-kraalgootbeugel-3-125mm
- How to calculate
- You buy this end outlet per piece.
- Common mistake
- Mixing up left and right. Work out the side from outside, facing the gutter, and see which hand the downpipe is on.
PVC half-round gutter end outlet left 125mm
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
When do I use a half-round gutter end outlet left 125 mm?
When the downpipe goes at the left-hand end of a 125 mm half-round gutter, seen from outside. The end outlet then replaces the stop end left.
Can I fit an end outlet at both ends of a half-round gutter?
Yes, on a long wall you can. Use an end outlet left on the left and an end outlet right on the right, and let the gutter fall from the middle towards both sides.
Does this end outlet fit a box gutter?
No, it is shaped to the round half-round gutter profile and only fits the 125 mm half-round gutter.