Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | polyvinylchloride |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
This PVC pipe clip Ø80 fixes an 80 mm downpipe to the wall. You choose 80 mm rainwater drainage for larger roof areas, such as the roof of a house, a shed with a sizeable roof or a commercial building, because it can carry away more rainwater at a time than a narrower pipe. The clip is made of grey PVC and keeps the downpipe straight and clear of the wall. With an 80 mm pipe that handles plenty of water in a downpour, secure fixing matters: it keeps the pipe seated in the bend under the gutter and in the downpipe shoe or sewer connection at the bottom. Tip: also fit a clip just above every connecting socket in the pipe, so the upper length cannot slide down into the lower one. You can easily order these clips online from Houthandel Jan Sok in Meppel; collection at Celsius 10 and home delivery are both possible.
Key features
- Ø80 mm: Fits around a downpipe with an outside diameter of 80 mm.
- Grey PVC: Weather-resistant and matches a grey downpipe.
- For larger roofs: Goes with 80 mm rainwater drainage that handles a lot of water.
- Straight and secure: Holds the downpipe at a fixed distance from the wall.
- Secures joints: Stops pipe lengths from sliding into each other.
Applications
Suitable for, among other things:
- The downpipe of a house with a large roof area.
- Rainwater drainage of a shed, barn or commercial building.
- An 80 mm downpipe discharging via a downpipe shoe or into the sewer.
- Replacing a broken clip on an existing 80 mm downpipe.
Suitable for
This clip goes with:
- PVC downpipe Ø80 x 1.5 mm (4.00 m).
- PVC bends, connecting sockets and extended sockets Ø80.
- A short downpipe shoe 60x80 for Ø70/Ø80 or an extended downpipe shoe.
- A hopper head or leaf separator in Ø80.
Installation
- Mark out: Use a plumb line to set the line from the gutter outlet downwards.
- Top clip: Fit the first clip directly below the bend at the gutter.
- At the sockets: Fit a clip just above every connecting socket in the downpipe.
- Bottom clip: Fit a clip just above the downpipe shoe or the sewer connection.
- Finish: Place the pipe in the clips, close them and check that everything hangs straight and free of stress.
Product specifications
| Property | Value |
|---|---|
| Diameter | Ø80 mm |
| Material | PVC |
| Colour | Grey |
| Application | Rainwater drainage (downpipe) |
| Volume | 1 piece |
For beginners
Beginner
With this clip you hang an 80 mm downpipe on the wall. Fit a clip at the top, at the bottom and at every socket, so the pipe stays firmly in place.
- Tools
- Drill with masonry bit
- Plumb line or spirit level
- Screwdriver
- Tape measure
- Ladder
- Also needed
- pvc-regenpijp-80-x-15mm-400m
- pvc-verbindingsmof-80-mof-spie
- pvc-bocht-45-graden-80-mof-spie
- How to calculate
- You buy this pipe clip per piece.
- Common mistake
- A common mistake is not supporting the connecting socket halfway up the pipe, so the pipe sags after a while. Always fit a clip just above it.
PVC pipe clip Ø80
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
Which clip do I need for an 80 mm downpipe?
You need the PVC pipe clip Ø80. It closes exactly around a downpipe with an outside diameter of 80 mm.
Why a clip at every connecting socket?
A clip just above the socket stops the upper pipe length from sliding down into the lower one. That keeps the joint in the right place.
When do you choose an 80 mm downpipe instead of 70 mm?
You usually choose an 80 mm downpipe for a larger roof area, because it can carry away more water at once. The right size depends on the roof area and the number of downpipes.