Harry swing is a freestanding swing frame in impregnated, planed pine for the private garden. The set measures 359 cm in length and 243 cm in height, with a standing width of approx. 280 cm. The posts and top beam are 8.8 x 8.8 cm. The pack contains the timber, 4 ground anchors, 4 swing hooks, fixings and a construction drawing. Swing seats and other play accessories are not included: you choose seats, a nest swing, rings or a trapeze yourself. Plan free fall space around the set. This play equipment is intended for private garden use, not as a public playground.

Key features

Harry is a sturdy pine swing frame for two hanging points, without seats.

• Dimensions 359 x 280 x 243 cm: Length, depth and height of the freestanding frame.
• Impregnated planed pine: Smooth-finished softwood, treated for outdoors.
• Beams 8.8 x 8.8 cm: Sturdy posts and top beam for a stable frame.
• Two hanging points: Space for two accessories side by side.
• Anchors and hooks included: 4 ground anchors and 4 swing hooks in the pack.
• Seats not included: Choose the play accessories to suit age and use yourself.

Applications

This swing frame belongs in a private garden with enough free space.

• Garden play area: Place the frame on a flat, open field, not against a fence or facade.
• Two swings: Hang two seats or a mix of seat and nest swing.
• Interchangeable accessories: Swap seats, rings or a trapeze on the hooks provided.
• Family garden: Intended for private use, not for a school yard or playground.

Suitable substrates

• Grass with impact absorption: Keep the ground flat; add extra fall protection where needed.
• Sand or wood-chip bed: Only on a flat, permeable layer of sufficient thickness.
• Not on hard tiles without fall space: Hard paving under a swing raises the injury risk.

Instructions for use

Assemble the frame according to the construction drawing and anchor it before first use.

1. Measure the play zone: Allow approx. 2 metres of free space around the set.
2. Make the ground flat: Remove hollows, roots and obstacles under the swing path.
3. Build according to the drawing: Set posts and top beam square and fasten them firmly.
4. Fit the 4 ground anchors: Anchor the frame in the ground according to the instructions.
5. Fit the 4 swing hooks: Mount the hooks on the top beam before you hang accessories.
6. Hang approved accessories: Use seats or a nest swing that matches the hook spacing.
7. Check bolts and anchors: Retighten joints and repeat that after the first weeks of play.
8. Inspect regularly: Check timber, hooks, chains or ropes for wear.

Product specifications

Specifications of Harry swing (Freeswing pine kit).