Short answer: The key steps to install a wooden fence with garden screens yourself are: (1) boundary, neighbours, permit and cable check, (2) measure and material list, (3) set and foundation posts, (4) mount screens, (5) check and maintain. Core steps below. Full weekend plan: fence project guide.
Materials: garden screens · Overview: wooden screens and fences · Prices: fence costs.
1. Boundary, neighbours, permit and cables
Confirm the boundary (land registry if unsure). Exactly on the line often needs neighbour consent. Up to ±2 m in the rear garden is often permit-free; check the environment desk. File a cable enquiry before digging. Details: fence project - preparation.
2. Measure and material list
Measure length, choose height and post centres (often ±191 cm for standard screens). List screens, posts, base plates, concrete/gravel, stainless fasteners. Ask for a material calculation or quote.
3. Foundation and setting posts
Mark with a string line. Dig deep enough (often 60–80 cm), gravel base, plumb the post, let concrete cure. This decides whether the fence stays straight. Steps: project - setting posts.
4. Mount garden screens
Hang or screw screens level between posts. Allow expansion/ventilation as specified. Use stainless or outdoor-rated screws. Tips: fence installation tips.
5. Finish and maintenance
Check the top line, post firmness and protruding screws. Treat timber after a few months drying, then periodically. Finish tips: project - finishing.
Need material advice? Call 0522 851 551 or order via the fencing shop.
Frequently asked questions
What are the most important steps to install a wooden fence with garden screens yourself?
Arrange boundary and cables, measure and order materials, set posts deep and plumb, mount screens level, check and maintain. Full plan: fence project guide.
How long does DIY installation take?
For about 10 metres, plan one weekend with two people, plus concrete curing time.
Do I need a permit?
Up to 2 m in the rear garden usually not; front boundaries are stricter. Always check the environment desk or your municipality.
Where is the complete step-by-step guide?
At /project/schutting - this page summarises the essentials for quick orientation.