Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | polyvinylchloride |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
The cap seal ring Ø40 is a black rubber EPDM sealing ring for the screw cap of the universal trap Ø40. The ring sits between the cap and the trap body and keeps the trap watertight and odour-tight after you have opened it to clear a blockage. EPDM is a type of rubber that stands up well to water and temperature changes, which is handy on drains from a shower, washing machine or washbasin. If your trap leaks around the cap or you smell sewer odours after cleaning, the cap seal ring is often flattened, torn or sitting crooked. Replace the ring, clean the thread of the cap and body, then tighten the cap hand-tight only. Feel free to keep a few in stock. You can order the cap seal ring from Houthandel Jan Sok online, or pick it up at the counter at Celsius 10 in Meppel.
Key features
- Size Ø40: for the screw cap of the universal trap Ø40.
- EPDM rubber: durable and resistant to water and temperature changes.
- Watertight and odour-tight: seals the cap properly again after unblocking.
- Black: easy to tell apart from the grey trap during fitting.
Applications
Used for, among other things:
- Leaks at the cap of a 40 mm trap.
- Periodic maintenance of a shower or washing machine trap.
- A deformed or dried-out cap seal ring after years of use.
Fits
This ring is intended for:
- The screw cap of the ABS universal trap Ø40.
- Use together with the collar piece Ø40 for a complete overhaul.
- Trap drains from a shower, washbasin or washing machine on a 40 mm pipe.
Fitting
- Open the cap: unscrew the screw cap over a bucket.
- Remove the old ring: take out the old cap seal ring and check whether any residue is left behind.
- Clean the thread: clean the thread and the sealing surface of the body and cap.
- Fit the new ring: lay the new ring flat and without twisting in its place.
- Tighten by hand: screw the cap on hand-tight and check for leaks.
Product specifications
| Property | Value |
|---|---|
| Diameter | Ø40 |
| Material | EPDM |
| Colour | black |
| Suitable for | universal trap Ø40 |
| Volume | 1 piece |
For beginners
Beginner
The cap seal ring is the little rubber ring under the screw cap of your trap. If the trap leaks at the cap, this ring is usually the cause. Replacing it is easy and needs no tools.
- Tools
- Bucket
- Cloth
- Also needed
- abs-universele-sifon-40
- kraagstuk-universele-sifon-40
- How to calculate
- You buy this per piece.
- Common mistake
- The cap is tightened with water pump pliers, which flattens the ring so that it actually starts to leak. Only tighten the cap hand-tight.
Cap seal ring Ø40
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
What is a cap seal ring Ø40 for?
It seals the screw cap of the universal trap Ø40. Without a good ring the trap leaks water and sewer odours can escape.
My trap leaks after unblocking, is it the cap seal ring?
Often, yes. The ring may have shifted, been flattened or damaged; seat it straight or replace it with a new one.
What material is the cap seal ring made of?
The cap seal ring is made of EPDM, a durable type of rubber that resists water and temperature changes.