Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | polyvinylchloride |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
With the cap seal ring Ø50 you make the screw cap of the universal trap Ø50 watertight again. This rubber sealing ring sits between the cap and the bowl of the trap. Because the 50 mm trap is usually under a kitchen worktop or sink and is opened more often there to remove grease and food scraps, the cap seal ring wears faster here than on a bathroom trap. A new ring is then a cheap and quick fix. When replacing it, make sure the ring lies flat in the groove and is not twisted, otherwise the cap will not seal evenly. Remove grease residue from the thread with a cloth and warm water before screwing the cap back on. Order the cap seal ring online together with other waste parts, or collect it from Houthandel Jan Sok in Meppel; delivery across the Netherlands is also possible.
Key features
- Size Ø50: fits the screw cap of the universal trap Ø50.
- Rubber seal: seals the cap watertight and odour-tight.
- Quick to replace: no tools or gluing needed.
- Suitable for intensive use: ideal as a spare for a kitchen trap that needs opening often.
Applications
Used for, among other things:
- Leaks at the cap of a kitchen trap.
- Maintenance of a sink trap in a utility room or workshop.
- A cap seal ring that has hardened, cracked or deformed.
Fits
This ring is intended for:
- The screw cap of the ABS universal trap Ø50.
- Combination with the collar piece Ø50 during a full overhaul of the trap.
- Kitchen and sink wastes on a 50 mm pipe.
Installation
- Place a bucket: put a bucket under the trap and unscrew the cap.
- Clean: remove the old ring and degrease the bowl and cap.
- Fit: lay the new cap seal ring flat in the cap or on the bowl.
- Close: screw the cap straight and hand-tight onto the bowl.
- Check: let a full sink drain and see whether the cap stays dry.
Product specifications
| Property | Value |
|---|---|
| Diameter | Ø50 |
| Material | rubber |
| Suitable for | universal trap Ø50 |
| Volume | 1 piece |
For beginners
Beginner
Under the screw cap of a 50 mm trap there is a rubber ring that keeps everything sealed. If it is worn, the trap leaks. With this new ring you fix that in a few minutes.
- Tools
- Bucket
- Cloth
- Warm water with washing-up liquid
- Also needed
- abs-universele-sifon-50
- kraagstuk-universele-sifon-50
- How to calculate
- You buy this per piece.
- Common mistake
- The new ring is twisted or seated half out of the groove, so the cap closes askew. Lay the ring flat and screw the cap on straight.
Cap seal ring Ø50
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
Which trap does the cap seal ring Ø50 fit?
The screw cap of the universal trap Ø50, which is often fitted under kitchens and sinks.
How often should you replace a cap seal ring?
Only if it leaks, cracks or has gone hard. With a kitchen trap that is opened often, that happens sooner than in the bathroom.
Should I grease the cap seal ring?
No, that is usually not necessary. Above all, make sure the ring and thread are clean and tighten the cap hand-tight.