Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | polyvinylchloride |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
The PVC reducer insert Ø70 x Ø50 is the connector between a 70 mm downpipe and a 50 mm drain pipe. Ø70 is a widely used size for rainwater pipes on homes and outbuildings. If you want to connect a smaller drain to it, for example from a balcony, a dormer or a small roof outlet, you bond this insert into the socket of a Ø70 bend, tee or coupler. The advantage of the insert type is that you do not need to fit an extra separate reducer between two sockets: the part disappears into the existing socket. Make sure the water flows from the Ø50 pipe into the Ø70 pipe and not the other way round. After bonding, check that the insert is fully home up to the stop, otherwise a small lip can form where leaves and dirt collect. You can collect this reducer insert from Houthandel Jan Sok in Meppel; if you would rather receive it at home, that is possible too, as we deliver across the Netherlands.
Key features
- Ø70 to Ø50 transition: links a 70 mm rainwater system to a 50 mm drain pipe.
- Insert design: fits into the socket of a Ø70 fitting, without an extra intermediate socket.
- Permanent joint: bonded with PVC solvent cement.
- Smooth flow: when fully bonded in, it gives a smooth transition.
- PVC: suitable for outdoor use in a rainwater drain.
Applications
You use this insert for example for:
- Connecting a Ø50 dormer or balcony drain to a Ø70 downpipe.
- Letting a small roof outlet from a shed or storeroom discharge into the existing rainwater system.
- Fitting a Ø50 side branch into a Ø70 tee.
- Replacing a worn transition between 50 and 70 mm pipe.
Connects to
Combine this insert with:
- The socket of a Ø70 bend (45 or 87.5 degrees) or Ø70 tee.
- A PVC coupler Ø70 socket/spigot.
- PVC downpipe Ø70 via a fitting with a socket.
- PVC drain pipe Ø50 on the small end.
Installation
- Dry fit: First fit everything together without cement to check length and direction, and make a pencil mark.
- Prepare the pipe: Cut the Ø50 pipe straight and deburr the cut.
- Degrease: Clean the Ø70 socket, the outside of the insert and the Ø50 pipe end with PVC cleaner.
- Bond: Apply PVC solvent cement and push the insert into the Ø70 socket in one go up to the stop; repeat this for the Ø50 pipe.
- Finish: Remove cement residue and let the joint dry undisturbed.
Product specifications
| Property | Value |
|---|---|
| Type | Reducer insert (insert-type reducer) |
| Large end | Ø70 mm, fits into a Ø70 socket |
| Small end | Ø50 mm |
| Material | PVC |
| Connection | Solvent weld |
| Sales unit | 1 piece |
| Volume | 1 piece |
For beginners
Beginner
This insert turns a 70 mm downpipe connection into a 50 mm connection. Ideal if you want a small drain to discharge into your existing downpipe.
- Tools
- Fine-tooth saw or pipe cutter
- Deburring tool or file
- PVC cleaner and a clean cloth
- PVC solvent cement with brush
- Folding rule or tape measure and pencil
- Also needed
- pvc-afvoerbuis-50-200m
- pvc-verbindingsmof-70-mof-spie
- pvc-bocht-875-graden-70-mof-spie
- pvc-t-stuk-875-graden-70-2x-mof-spie
- How to calculate
- You buy this per piece.
- Common mistake
- A common mistake is not pushing the insert fully up to the stop, which leaves a ridge. Make a pencil mark beforehand and check it after bonding.
PVC reducer insert Ø70 x Ø50
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
Does a reducer insert Ø70 x Ø50 fit into any 70 mm socket?
Yes, as long as it is a PVC fitting with a Ø70 solvent-weld socket. The 70 mm is the outside diameter of the pipe, so the insert fits into the socket that goes with Ø70 downpipe.
Do I still need a separate socket with this insert?
No, the insert goes directly into the socket of an existing Ø70 fitting. You only need a coupler if you end up on a plain pipe.
Is Ø50 big enough for a balcony drain?
That depends on the roof area and local requirements. Ø50 is often used for small areas; if in doubt, ask an installer or ask us at the counter.