Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | polyvinylchloride |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
The PVC end cap Ø125 permanently seals a 125 mm waste pipe. You find this size in the main drainage and in the underground drain to the municipal sewer. The cap goes over the pipe end and is solvent-welded in place, after which the pipe is sealed against water, sand and sewer gases. Underground, a good seal is especially important: a leaking cap lets in groundwater and sand and draws roots to the pipe. So solvent-weld carefully and let the joint cure before you backfill the trench. Record a capped spare connection on a drawing or with a photo and tape measure, so you can find it again later if you want to extend. If you are working temporarily and still plan to continue, use a protective cap instead of a solvent-welded cap. Order the end cap online and choose delivery, or collect it from Houthandel Jan Sok in Meppel.
Key features
- Diameter Ø125 mm: for main sewer and underground drain.
- Fits over the pipe: the cap slides over the plain pipe end.
- Solvent-welded: permanently sealed against water, sand and sewer gases.
- PVC: the same material as the sewer pipe, so it bonds well.
Applications
Suitable for uses including:
- Spare connection on the underground drain for a future extension.
- Sealing a redundant pipe after rerouting the sewer.
- End of a 125 mm pipe under a new floor.
- Capping off an old connection after disconnecting the rainwater.
Fits
You solvent-weld the end cap over a plain 125 mm pipe end:
- PVC waste pipe Ø125 mm.
- The spigot end of PVC fittings Ø125 mm.
- A piece of 125 mm pipe sticking out of a tee or bend.
Installation
- Dig out: clear the pipe end all the way round so you can work cleanly.
- Cut the pipe: saw the pipe end off square at the required length.
- Deburr: remove burrs and lightly chamfer the outer edge.
- Degrease: clean the pipe end and the inside of the cap with PVC cleaner.
- Solvent weld: apply PVC solvent cement to the pipe end and cap and push the cap on in one movement up to the stop.
- Cure: wipe away excess cement and only load or test the pipe after the drying time stated on the cement packaging.
Product specifications
| Property | Value |
|---|---|
| Material | PVC |
| Diameter | Ø125 mm |
| Connection | solvent-weld socket, fits over the pipe |
| Sales unit | 1 piece |
| Volume | 1 piece |
For beginners
Intermediate
With this cap you permanently seal a 125 mm sewer pipe, for example a connection you no longer use. The cap is glued in place. Work in a dry, clean trench, otherwise the cement will not bond well.
- Tools
- PVC cleaner and clean cloth
- PVC solvent cement with brush
- Fine-toothed saw or pipe cutter
- File or deburring scraper
- Spade
- Also needed
- pvc-afvoerbuis-125-200m
- pe-speciedeksel-125
- pvc-eindstuk-schroefdraad-spie-125-lijmmof
- How to calculate
- You buy the end cap per piece.
- Common mistake
- Gluing onto a wet or sandy pipe end gives a leaking joint. Make the end dry and clean and degrease it before you glue.
PVC end cap Ø125
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
Which end cap fits a 125 mm underground drain?
The PVC end cap Ø125. You solvent-weld it over the plain end of the 125 mm pipe.
Can I use a Ø125 end cap underground?
Yes, provided you solvent-weld it carefully and let it cure before you backfill the trench.
When do I choose a protective cap instead of an end cap?
Choose a protective cap if you will be extending the pipe soon; it is temporary and needs no adhesive. An end cap is for sealing permanently.