Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | Aluminium |
| Thickness | 95mm |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
The aluminium box gutter bracket-2 for a 95 mm box gutter carries a small plastic roof gutter, as found on a shed, summerhouse, carport, canopy or dormer. The number 2 indicates the bracket type: a type 2 box gutter bracket is used to fix the roof gutter directly to the wall. The bracket is made of aluminium, a light metal that does not rust and is therefore suitable for outdoor use. For a straight roof gutter, first set the outer brackets at height, with a slight fall towards the outlet, and stretch a string line between them. Then fit the intermediate brackets to that line, at a spacing of no more than about 50 cm. That way the 95 mm box gutter will not sag. You order the brackets per piece from Houthandel Jan Sok and have them delivered, or take them straight home from our shop in Meppel.
Key features
- Type 2: box gutter bracket for fixing to the wall.
- For 95 mm box gutter: designed for the smaller box gutter size.
- Aluminium: light and rustproof, suitable for outdoor use.
- Available per piece: buy exactly the number you need.
Applications
For use on:
- Sheds and summerhouses with a 95 mm box gutter.
- Carports, verandas and canopies.
- Dormers and small extensions.
- Situations where the gutter has to hang directly against the wall.
Suitable for
This bracket goes with:
- PVC box gutter 95 mm.
- Box gutter fittings 95 mm such as angles, stop ends and unions.
- A wall of timber, masonry or sheet material, with suitable screws and plugs.
Installation
- Outer brackets: first fit the brackets at both ends, the highest at the end opposite the outlet.
- Stretch a string line: stretch a line between the two outer brackets for a straight line with a fall.
- Intermediate brackets: fit the remaining brackets along the line, no more than about 50 cm apart.
- Fix: screw the brackets in place through the pre-drilled holes with stainless steel screws.
- Fit the gutter: clip the 95 mm box gutter into the brackets and check the fall with water.
Product specifications
| Property | Value |
|---|---|
| Type | box gutter bracket no. 2 |
| Gutter size | 95 mm |
| Material | aluminium |
| Fixing | to the wall |
| Volume | 1 piece |
For beginners
Beginner
A gutter bracket holds the roof gutter in place. This aluminium bracket is for a small 95 mm box gutter that you fix to the wall, for example on a shed. Make sure the gutter runs slightly downhill towards the downpipe.
- Tools
- Drill
- Spirit level
- String line
- Tape measure
- Screwdriver or bit set
- Also needed
- pvc-bakgoot-95mm-400m
- pvc-bakgoot-verbindingsstuk-95mm
- pvc-bakgootuitloop-95mm-60
- pvc-bakgoot-eindstuk-links-95mm
- How to calculate
- You buy this per piece; allow about two brackets per metre of gutter.
- Common mistake
- The brackets are set too far apart, so the gutter sags and water stays standing. Keep no more than about 50 cm between the brackets.
Aluminium box gutter bracket-2 95mm
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
What does number 2 mean on a box gutter bracket?
The number indicates the bracket type. You use a type 2 box gutter bracket to fix the roof gutter directly to the wall.
How many aluminium 95 mm box gutter brackets do I need per metre?
Allow at least two brackets per metre, because the spacing between brackets should be no more than about 50 cm. In addition, place a bracket close to angles and outlets.
Does an aluminium gutter bracket rust?
No, aluminium does not rust. That makes the bracket suitable for permanent outdoor use.