Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | polyvinylchloride |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
You use this PVC end cap Ø32 to seal off a 32 mm waste pipe for good. You come across this when a washbasin, cloakroom basin or bidet is removed or moved and the old waste still sticks out of the wall or floor. The cap goes over the pipe end and is bonded in place. A waste left open lets sewer smells into the home, even if it is concealed in a wall. So cut the old pipe back short, but leave enough pipe for the full insertion depth of the cap. Degrease, apply cement and push the cap on in one go. If the pipe is later concealed behind tiling, check with a little water after curing that the joint stays dry. A small effort that prevents damp problems behind the tiles. Order the end cap from Houthandel Jan Sok for delivery across the Netherlands or collect it in Meppel.
Key features
- Diameter Ø32 mm: for washbasin, cloakroom basin and bidet wastes.
- Over the pipe: the cap fits over the smooth pipe end.
- Bonded: permanently watertight and odour-tight.
- Compact: needs little space, handy in a wall or behind a cabinet.
Applications
Suitable for, among other things:
- Redundant basin waste after moving the washbasin.
- Old cloakroom basin connection in the toilet.
- Bidet waste removed during a renovation.
- End of a 32 mm pipe that is not being extended.
Fits on
The end cap is bonded over a smooth 32 mm pipe end:
- PVC waste pipe Ø32 mm.
- The spigot end of PVC fittings Ø32 mm.
- A length of 32 mm pipe sticking out of a tee or bend.
Installation
- Cut the pipe: saw the pipe end square to the required length.
- Deburr: remove burrs and lightly chamfer the outer edge.
- Degrease: clean the pipe end and the inside of the cap with PVC cleaner.
- Bond: apply PVC solvent cement to the pipe end and cap and push the cap on in one movement up to the stop.
- Cure: wipe away excess cement and only load or test the pipe after the drying time stated on the cement packaging.
Product specifications
| Property | Value |
|---|---|
| Material | PVC |
| Diameter | Ø32 mm |
| Connection | solvent weld socket, fits over the pipe |
| Sales unit | 1 piece |
| Volume | 1 piece |
For beginners
Intermediate
You bond this cap onto a 32 mm waste pipe you no longer use, such as the old waste of a washbasin. That stops sewer smells coming out. Make sure the pipe end is clean before you apply the cement.
- Tools
- PVC cleaner and a clean cloth
- PVC solvent cement with brush
- Fine-toothed saw or pipe cutter
- File or deburring tool
- Also needed
- pvc-afvoerbuis-32-200m
- pe-speciedeksel-32
- pvc-lijmmof-32
- How to calculate
- You buy the end cap per piece.
- Common mistake
- The pipe is often cut too short, so the cap does not go far enough onto the pipe. Leave at least the full insertion depth of the cap in pipe length.
PVC end cap Ø32
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
How do I seal off an old 32 mm basin waste?
With a PVC end cap Ø32 that you bond over the shortened pipe end. That stops sewer smells coming out.
Can I conceal the end cap Ø32 behind tiles?
Yes, as long as the solvent weld joint has fully cured and is sealed. Test it briefly with water before tiling.
Does the end cap also work on a plastic trap pipe?
No, the cap is designed for 32 mm PVC waste pipe. Trap pipes are often made of a different material and are not bonded this way.