Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | polyvinylchloride |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
With the PVC end cap Ø40 you seal off a 40 mm waste pipe for good. This size is often used for the wastes of the shower, bath, washing machine and kitchen. If one of these appliances is removed or moved, you bond this cap over the remaining pipe end and the old connection is closed. A forgotten open washing machine waste behind a cupboard or in the utility room is a well-known source of sewer smells and sometimes even pests. A bonded end cap solves that for good. Do make sure the pipe really is no longer needed: a washing machine sometimes goes back in the same place. In that case a temporary solution is smarter. For a shower floor that is being removed, bond the cap before the new floor is poured. You will find the end cap in our webshop and can collect it from Celsius 10 in Meppel or have it delivered to your home.
Key features
- Diameter Ø40 mm: for shower, bath, washing machine and kitchen wastes.
- Over the pipe: the cap slides over the smooth pipe end.
- Bonded: permanent and odour-tight.
- PVC: bonds well with PVC solvent cement.
Applications
Suitable for, among other things:
- Redundant shower waste during a bathroom refit.
- Old washing machine connection that is no longer used.
- Bath waste after replacing a bath with a walk-in shower in a different position.
- End of a 40 mm pipe in a crawl space.
Fits on
The end cap is bonded over a smooth 40 mm pipe end:
- PVC waste pipe Ø40 mm.
- The spigot end of PVC fittings Ø40 mm.
- A length of 40 mm pipe sticking out of a bend or tee.
Installation
- Cut the pipe: saw the pipe end square to the required length.
- Deburr: remove burrs and lightly chamfer the outer edge.
- Degrease: clean the pipe end and the inside of the cap with PVC cleaner.
- Bond: apply PVC solvent cement to the pipe end and cap and push the cap on in one movement up to the stop.
- Cure: wipe away excess cement and only load or test the pipe after the drying time stated on the cement packaging.
Product specifications
| Property | Value |
|---|---|
| Material | PVC |
| Diameter | Ø40 mm |
| Connection | solvent weld socket, fits over the pipe |
| Sales unit | 1 piece |
| Volume | 1 piece |
For beginners
Intermediate
With this cap you permanently seal off a 40 mm waste, for example from a shower or washing machine you no longer use. The cap is bonded on and cannot be removed afterwards. Not sure whether you will need the waste again? Then choose a temporary cap.
- Tools
- PVC cleaner and a clean cloth
- PVC solvent cement with brush
- Fine-toothed saw or pipe cutter
- File or deburring tool
- Also needed
- pvc-afvoerbuis-40-200m
- pe-speciedeksel-40
- pvc-bocht-90-graden-40-mof-spie
- How to calculate
- You buy the end cap per piece.
- Common mistake
- Too much cement in the cap gets pushed inwards as you slide it on and can trap dirt later. Apply a thin, even layer.
PVC end cap Ø40
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
How do I seal off an old 40 mm washing machine waste?
Bond a PVC end cap Ø40 over the pipe end. Degrease the pipe and cap first, and the waste is permanently sealed.
Can I use an end cap Ø40 under a screed?
Yes, if the joint has been properly bonded and has cured before the floor is poured.
What if I might need the waste again later?
Then it is better to use a mortar cap or another removable end piece. A bonded end cap can only be removed by sawing off the pipe.
Can I collect the end cap Ø40 in Meppel today?
You can order online and collect from Houthandel Jan Sok at Celsius 10 in Meppel; delivery across the Netherlands is also possible.