Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | polyvinylchloride |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
With the PVC end cap Ø75 you permanently seal a 75 mm waste pipe. You come across the 75 mm size in soil stacks, in rainwater drainage inside the house and in branches off the sewer system. The cap fits over the pipe end and is glued. A common situation: during a renovation a branch of the soil stack becomes redundant, for example because a bathroom moves to another floor. Don't leave that branch open in the duct or the floor, but cut it short and glue an end cap on it. This prevents sewer smells in the house. Bear in mind that the top of a soil stack is often also the vent; you don't simply seal that off. If you are unsure about the role of a pipe, get advice first. Need an end cap? Order it online and collect it at Celsius 10 in Meppel, or have it delivered.
Key features
- Diameter Ø75 mm: for 75 mm soil stacks, rainwater pipes and branches.
- Over the pipe: the cap slides over the smooth pipe end.
- Glued: permanently watertight and odour-tight.
- PVC: bonds well with PVC solvent cement.
Applications
Suitable for, among other things:
- Sealing a redundant branch of a 75 mm soil stack.
- End of a 75 mm pipe after moving a bathroom.
- Capping an unused 75 mm branch on a T-piece.
- 75 mm rainwater drainage that is no longer used.
Fits
Glue the end cap over a smooth 75 mm pipe end:
- PVC waste pipe Ø75 mm.
- The spigot end of PVC fittings Ø75 mm.
- A length of 75 mm pipe in the branch of a T-piece.
Installation
- Cut the pipe to length: saw the pipe end square at the required length.
- Deburr: remove burrs and lightly chamfer the outer edge.
- Degrease: clean the pipe end and the inside of the cap with PVC cleaner.
- Glue: apply PVC solvent cement to the pipe end and cap and push the cap on in one movement up to the stop.
- Cure: wipe off excess cement and only load or test the pipe after the drying time stated on the cement packaging.
Product specifications
| Property | Value |
|---|---|
| Material | PVC |
| Diameter | Ø75 mm |
| Connection | solvent-weld socket, fits over the pipe |
| Sales unit | 1 piece |
| Volume | 1 piece |
For beginners
Intermediate
With this cap you seal a 75 mm waste pipe for good. You glue it over the end of the pipe. Make sure you don't seal a vent: the top of a soil stack usually has to stay open.
- Tools
- PVC cleaner and a clean cloth
- PVC solvent cement with brush
- Fine-toothed saw or pipe cutter
- File or deburring tool
- Also needed
- pvc-afvoerbuis-75-200m
- pvc-t-stuk-90-graden-75-3x-mof
- pe-speciedeksel-75
- How to calculate
- You buy the end cap per piece.
- Common mistake
- Sealing the top of a soil stack because "air comes out" is a common mistake: that opening is the vent. Only seal branches that are genuinely redundant.
PVC end cap Ø75
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
May I seal the top of a 75 mm soil stack?
No, not just like that. The top of a soil stack often serves as the vent; sealing it can lead to gurgling drains and traps being sucked dry.
How do I seal a redundant 75 mm branch?
Cut the branch short and glue a PVC end cap Ø75 over it, after degreasing with PVC cleaner.
Is the PVC end cap Ø75 also suitable for rainwater drainage?
Yes, it fits over any smooth 75 mm PVC pipe, so also over a rainwater pipe of that size.