Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | polyvinylchloride |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
The 125 mm PVC box gutter glue outlet is a grey outlet that you place somewhere along the length of the 125 mm box gutter, so not at the end. That is why it is also called a running outlet or intermediate outlet. Through the outlet, the rainwater from the gutter goes into the downpipe. As the name says, this outlet is glued in place. A running outlet is handy on a long wall: the water then flows to one point in the middle, so the gutter only has to cover a short distance from each side. You make an opening in the bottom of the gutter where the downpipe goes and glue the outlet onto it there. Use the outlet as a template for marking out and thoroughly degrease the surfaces to be glued. At Houthandel Jan Sok in Meppel you can order this glue outlet online and collect it, or have it delivered across the Netherlands.
Key features
- Running outlet: placed along the length of the gutter, not at the end.
- Glued joint: glued to the gutter with PVC adhesive.
- Size 125 mm: for the 125 mm PVC box gutter.
- Grey PVC: matches the gutter and fittings from the same range.
Applications
You use a glue outlet, for example, on:
- Long walls where the downpipe is halfway along.
- Gutters that drain from two sides to one point.
- Moving or adding a downpipe in an existing 125 mm gutter.
Connects to
- PVC box gutter 125 mm (the outlet is glued into the gutter).
- A PVC downpipe on the underside.
- Stop ends left and right 125 mm at both gutter ends.
Installation
- Determine the position: choose where the downpipe goes and let the gutter fall towards this point from both sides.
- Mark out: use the outlet as a template to mark the opening in the bottom of the gutter.
- Make the opening: saw or drill out the opening and deburr the edges.
- Glue: degrease the gutter and outlet with PVC cleaner, apply PVC adhesive and fix the outlet in place.
- Finish: let the adhesive cure and then connect the downpipe.
Product specifications
| Property | Value |
|---|---|
| Type | Box gutter outlet (running outlet) |
| Gutter size | 125 mm |
| Connection | Glue |
| Material | PVC |
| Colour | Grey |
| Volume | 1 piece |
For beginners
Intermediate
With this outlet you make a drain to the downpipe somewhere in the middle of your gutter. You make a hole in the bottom of the gutter and glue the outlet over it.
- Tools
- Jigsaw or hole saw
- Pencil
- Deburring tool or file
- PVC cleaner and PVC adhesive
- Also needed
- pvc-bakgoot-125mm-400m
- pvc-bakgoot-eindstuk-links-125mm
- pvc-bakgoot-eindstuk-rechts-125mm
- How to calculate
- You buy this outlet per piece.
- Common mistake
- Sawing the opening too large, so the glue flange no longer seals all the way round. Always mark out with the outlet itself and rather saw slightly too small than too large.
PVC box gutter glue outlet 125mm
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
What is a glue outlet for a 125 mm box gutter?
A glue outlet is an outlet that you glue onto the bottom of the gutter somewhere along its length. This lets you connect the downpipe at any position you like along the wall.
Can I fit a glue outlet in an existing gutter?
Yes, if it is a 125 mm PVC box gutter. Make an opening in the bottom of the gutter, degrease the surfaces to be glued and glue the outlet in place.
What is the difference with an end outlet?
An end outlet sits at the end of the gutter and also closes it off. You place a glue outlet somewhere along the length of the gutter.