Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | polyvinylchloride |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
You use a PVC drain tee Ø80 to make a branch in an 80 mm drainage system. It lets you connect a side run to the main line, for example if you drain a lawn in a herringbone pattern or want your drainage to run along both the rear wall and the fence. All three connections have a diameter of 80 mm. With branches, the fall is extra important: the side run must always slope down towards the tee, and the main line from the tee onwards to the outfall point. Plan your layout on paper beforehand, so you know how many tees, couplers and end caps you need. Lay the tee on a level, compacted base and then backfill with drainage sand or gravel so it does not shift. You order your tee online from Houthandel Jan Sok; collection at Celsius 10 in Meppel is possible, and so is delivery across the Netherlands.
Key features
- Three Ø80 connections: main line in, main line out and a side branch.
- For branches: connects a side drainage run to the main line.
- Non-pressure system: intended for drainage, not for pressure or rising mains.
- PVC: sturdy, rot-proof plastic for underground use.
- Avoids loose ends: all runs come together in one outlet.
Applications
Suitable for, among other things:
- Lawn drainage in a herringbone or comb pattern.
- Drainage along two walls that meets at one outlet.
- Connecting an extra drain run to an existing pipe.
- Drainage around a summerhouse, shed or canopy.
Combine with
The tee fits into a Ø80 drainage system:
- Drainage pipe Ø80 for the main line and the side branch.
- PVC drain click coupler Ø80 to join extra lengths.
- PVC drain end cap Ø80 for the start of each run.
- PVC drain reducer Ø110 x Ø80 for the connection to a Ø110 PVC drain pipe.
Installation
- Set out: decide where the side branch joins the main line and dig the trenches with a fall towards the outfall point.
- Cut the main line: saw through the main line square at the right spot.
- Connect: slide both parts of the main line and the side branch into the tee.
- Check: make sure the side branch slopes down to the tee and that all pipes are firmly in place.
- Backfill: surround the tee with drainage sand or gravel and then put the soil back.
Product specifications
| Property | Value |
|---|---|
| Type | tee for drainage pipe |
| Diameter | Ø80 mm (all connections) |
| Material | PVC |
| Volume | 1 piece |
For beginners
Intermediate
With a tee you make a junction in your drainage, so two pipes come together in one outlet. Make sure both pipes run downhill towards the place where the water needs to go.
- Tools
- Fine-toothed saw or secateurs for drainage pipe
- Spirit level or straightedge with string line
- Spade
- Tape measure
- Also needed
- pvc-drain-klikmof-80
- pvc-drain-afsluitkap-80
- pvc-drain-verloop-110-x-80
- How to calculate
- You buy this per piece; you need one tee for each branch.
- Common mistake
- The side branch is often laid without a fall or even sloping upwards, so water stays standing in it. Use a spirit level or straightedge to check that every run slopes down to the tee.
PVC drain tee Ø80
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
How do I make a branch in Ø80 drainage pipe?
With a PVC drain tee Ø80. You saw through the main line, slide both parts into the tee and connect the side run to the third connection.
Which way should the fall go at a drain tee?
The side branch must slope down to the tee and the main line from the tee to the outfall point. That way the water always flows in one direction.
Can I also use a drain tee for a downpipe?
Preferably not. A drain tee is intended for perforated drainage pipe; you connect a downpipe to smooth PVC pipe and rainwater fittings.