Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | polyvinylchloride |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
This PVC drainage reducer Ø110 x Ø80 forms the transition between an 80 mm drainage pipe and the smooth 110 mm PVC drainage system. You use it at the point where your drainage discharges the collected groundwater: for example onto a Ø110 PVC pipe running to a ditch, a soakaway or, if your municipality allows it, the surface water sewer. The Ø110 side connects to the standard size for sewer pipe and below-ground drains, the Ø80 side to the drainage pipe. Because you switch to smooth pipe, you can lay the last section of the run without perforations. As a result you no longer lose water into the ground along the way, and you can run the pipe with less fall through a narrow trench or under paving. Tip: fit a small chamber or rodding eye just before the transition so that you can flush the drainage later. Order the reducer online and collect it from Celsius 10 in Meppel, or have Houthandel Jan Sok deliver it to your home.
Key features
- Ø110 to Ø80: transition from 110 mm PVC drainage to 80 mm drainage pipe.
- Connects two systems: joins perforated drainage to smooth, solid PVC pipe.
- At the discharge point: the last section to a ditch, chamber or sewer can be in solid pipe.
- PVC: rot-proof and suitable for use in the ground.
- Fewer makeshift solutions: no tape or sealant needed to join two different pipes.
Applications
Suitable for, among other things:
- Connecting garden drainage to a Ø110 PVC pipe running to a ditch or pond.
- Discharging drainage into a soakaway crate or gravel soakaway via solid pipe.
- Running a drainage line under a patio or path with smooth pipe.
- Connecting drainage to an existing Ø110 below-ground drain.
Connects to
On each side you connect a different pipe system:
- Ø110 side: Ø110 PVC drain pipe or a Ø110 fitting.
- Ø80 side: corrugated Ø80 drainage pipe.
- Also handy: PVC drainage click coupling Ø80 and PVC drainage end cap Ø80 in the same system.
Installation
- Plan: decide where the drainage changes to solid pipe and ensure a continuous fall to the discharge point.
- Shorten the drainage pipe: cut the Ø80 drainage pipe square between two ribs.
- Connect the drainage: slide the drainage pipe onto the Ø80 side of the reducer.
- Connect the PVC side: connect the Ø110 side to the Ø110 PVC pipe or fitting; follow that fitting's jointing method (solvent cement or rubber ring).
- Bed in: lay the reducer on a level, compacted base so that the transition does not sag.
Product specifications
| Property | Value |
|---|---|
| Type | reducer from drainage to PVC drain |
| Large connection | Ø110 mm |
| Small connection | Ø80 mm (drainage pipe) |
| Material | PVC |
| Volume | 1 piece |
For beginners
Intermediate
This reducer sits between your drainage pipe and an ordinary grey 110 mm PVC pipe. That way the water the drainage collects flows neatly to a ditch, chamber or sewer. Check beforehand where you are allowed to discharge the water.
- Tools
- Fine-toothed saw or pipe cutter
- Spirit level or straightedge
- Spade
- Tape measure
- Also needed
- pvc-afvoerbuis-110-200m
- pvc-drain-klikmof-80
- pvc-drain-afsluitkap-80
- How to calculate
- You buy this per piece; you use one for each transition from drainage to PVC pipe.
- Common mistake
- Drainage is often connected to the foul sewer without checking first, even though that is not allowed everywhere. Check with your municipality before you make the connection.
PVC drainage reducer Ø110 x Ø80
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
How do I connect Ø80 drainage pipe to a 110 mm PVC pipe?
With a PVC drainage reducer Ø110 x Ø80. The drainage pipe goes on the Ø80 side, the smooth PVC pipe or fitting on the Ø110 side.
Can I connect drainage to the sewer?
That varies by municipality. In many municipalities discharging groundwater into the foul sewer is not allowed; so first check what is permitted where you are, or discharge into a ditch, soakaway or surface water sewer.
Why the last section in smooth PVC pipe?
Because solid pipe no longer loses water into the ground and is easier to run under paving. The collected water then actually arrives at the discharge point.