Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | polyvinylchloride |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
The PVC bend 45 degrees Ø75 socket/socket is a grey bend for pipes with an outside diameter of 75 mm. You come across this size in stacks without a toilet connection, in the drainage of a roof terrace and in rainwater drainage that is routed indoors or underground. Both connection ends are solvent weld sockets. With this bend you offset a Ø75 pipe at an angle of 45 degrees, for example to let a vertical stack jog slightly past a row of joists or to run a rainwater pipe at an angle to a drain pit. Because both ends have a socket, you fit the bend directly between two lengths of pipe. On vertical pipes it is sensible to fix the pipe with a clip just below and above the bend, so the solvent weld joints do not carry the weight of the pipe. You can order the bend online and have it delivered, or collect it from Celsius 10 in Meppel.
Key features
- 45-degree angle: for a gentle offset in a stack or waste pipe.
- Ø75 mm: fits PVC pipe with a 75 mm outside diameter.
- 2x solvent weld socket: you bond a pipe end on both sides.
- Grey PVC: the standard colour for indoor drainage.
Applications
Suitable for uses including:
- An offset in a stack that has to pass a joist or pipe.
- Rainwater drainage running indoors or underground to a drain pit.
- The drainage of a roof terrace or flat roof via a Ø75 pipe.
- A collector pipe that several waste pipes connect to.
Fits / combine with
Can be combined with:
- PVC waste pipe Ø75 mm (2.00 or 4.00 metres).
- A PVC tee 45 degrees Ø75 for a side connection.
- An eccentric reducer 75 x 50 or 75 x 40.
- An eccentric reducer 110 x 75 for the transition to the sewer.
Instructions for use
Step-by-step connection:
- Cut to size: cut the Ø75 pipe square with a fine-toothed saw or pipe cutter and deburr the cut inside and out.
- Set the position: dry fit the bend and mark with a line how it should sit; once bonded you can no longer turn it.
- Degrease: clean the spigot end and socket with PVC cleaner; grease or dust prevents good adhesion.
- Apply cement: spread PVC solvent cement lengthways on both bonding surfaces and push the parts together straight away up to the stop.
- Check the fall: in horizontal pipes, check that the fall is correct before the cement sets.
Product specifications
| Property | Value |
|---|---|
| Material | PVC |
| Angle | 45 degrees |
| Diameter | Ø75 mm (outside diameter of the connecting pipe) |
| Connection | 2x solvent weld socket |
| Colour | Grey |
| Volume | 1 piece |
For beginners
Intermediate
This bend is for 75 mm pipes, for example a rainwater pipe or a stack. You bond a pipe into each side. On vertical pipes, fix the pipe next to the bend firmly with clips.
- Tools
- Fine-toothed saw or pipe cutter
- Deburring tool or file
- Folding rule or tape measure and pencil
- Clean, lint-free cloth
- Also needed
- pvc-afvoerbuis-75-200m
- pvc-lijmmof-75
- pvc-ophangbeugel-met-schroef-75
- pvc-t-stuk-45-graden-75-3x-mof
- How to calculate
- You buy this bend per piece.
- Common mistake
- The bend is often bonded in the wrong position, after which the pipe runs crooked. First dry fit the parts and mark the correct position with a line across bend and pipe.
PVC bend 45 degrees Ø75 socket/socket
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
What do you use a PVC bend 45 degrees Ø75 for?
For 75 mm pipes, such as stacks without a toilet and rainwater drainage. The bend lets such a pipe change direction by 45 degrees.
Does a vertical pipe with this bend need extra fixing?
Yes, fix the pipe with clips just above and below the bend. Then the weight of the pipe does not rest on the solvent weld joints.
What is the difference between socket/socket and socket/spigot?
Socket/socket has a widened solvent weld socket for a pipe on both sides. Socket/spigot has one socket and one plain pipe end (spigot) that you push into another socket.