Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | polyvinylchloride |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
The collar piece for the universal trap Ø32 is a separate replacement part for the inlet side of the 32 mm universal trap. It is a grey plastic collar piece (also called an inlet sleeve) that forms the connection between the waste outlet of the fixture and the trap. You need it if the original collar piece is damaged or missing, or if you are rebuilding the trap when replacing a cloakroom basin or hand basin. By replacing only the collar piece, you do not have to saw out a trap that is properly solvent-welded into the pipework. Do check that the part fits your trap: this collar piece is intended for the universal trap with a diameter of 32 mm. Clean the connecting surfaces before fitting the new collar piece. Order the part online or take it with you from Houthandel Jan Sok in Meppel.
Key features
- Size Ø32 mm: belongs with the universal trap Ø32.
- Separate replacement part: you replace only the inlet, not the whole trap.
- Grey plastic: same colour as the trap and grey waste pipes.
- Small and simple: quick to swap during maintenance or renovation.
Applications
Needed for, among other things:
- Replacing a cracked or damaged collar piece.
- Reconnecting a cloakroom basin or hand basin to an existing trap.
- Building a complete 32 mm trap connection from separate parts.
Fits
This collar piece fits:
- The ABS universal trap Ø32.
- Waste outlets of cloakroom basins and hand basins that come out at 32 mm.
- Use when replacing a cloakroom basin, with the trap staying in the pipework.
Fitting
- Drain the water: place a bucket under the trap and open the cap to empty the water seal.
- Remove the old collar piece: take the damaged collar piece off the trap.
- Clean: make the connecting surfaces free of grease and dirt.
- Fit the new collar piece: place the new collar piece on the trap and connect the waste outlet of the fixture.
- Check: fill the trap with water and see whether the connection stays dry.
Product specifications
| Property | Value |
|---|---|
| Diameter | Ø32 mm |
| Colour | grey |
| Suitable for | universal trap Ø32 |
| Volume | 1 piece |
For beginners
Beginner
This is a separate part of the 32 mm universal trap: the piece the waste outlet of your cloakroom basin or small washbasin goes into. Replace it if it is broken, so you do not have to replace the whole trap.
- Tools
- Bucket
- Cloth
- PVC cleaner if needed
- Also needed
- abs-universele-sifon-32
- How to calculate
- You buy this per piece.
- Common mistake
- A collar piece of the wrong diameter gets bought. First check whether your trap is 32, 40 or 50 mm.
Collar piece for universal trap Ø32
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
What is a collar piece of a universal trap Ø32?
It is the inlet part of the 32 mm universal trap, also called an inlet sleeve. You use it to connect the waste outlet of a cloakroom basin or washbasin to the trap.
Do I have to replace the whole trap if the collar piece is broken?
No, the collar piece can be replaced separately. That way you simply leave the solvent-welded trap in the pipework.
Does this collar piece also fit a 40 mm trap?
No, this collar piece is only for the universal trap Ø32. For a 40 mm trap you need the collar piece Ø40.