Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | polyvinylchloride |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
This 125 mm PVC half-round gutter stop end right closes off the right end of a 125 mm half-round gutter. The grey stop end is shaped to the round profile with the rolled bead edge, so the rainwater stays in the gutter and runs to the outlet. The right end is the side on your right-hand side when you stand outside in front of the gutter. On a gutter that drains to the left, with the stop end outlet on the left, this stop end goes at the high end of the gutter. Little water stands there, but in a heavy downpour or with a blocked outlet the end still needs to be fully sealed; so work carefully and degrease the joint surfaces well. A half-round gutter bracket right next to the end stops the end from sagging. You order the stop end right from Houthandel Jan Sok in Meppel, for delivery across the Netherlands or to collect from the shop.
Key features
- Right-hand version: closes off the right gutter end, seen from outside.
- Half-round gutter profile: follows the round shape and the bead edge.
- Size 125 mm: for the 125 mm PVC half-round gutter.
- Grey PVC: rustproof and low-maintenance.
Applications
Applications:
- Right gutter end on a half-round gutter that drains to the left.
- Half-round gutter on a house, garage, carport or shed.
- Replacing a damaged stop end right.
Combine with
- PVC half-round gutter 125 mm.
- Half-round gutter stop end outlet left 125 mm or stop end left 125 mm on the other side.
- Galvanised half-round gutter bracket 125 mm right next to the gutter end.
Installation
- Check the side: stand outside in front of the gutter; right is your right-hand side.
- Shortening the gutter: cut square and deburr the edge.
- Cleaning: degrease the gutter and stop end with PVC cleaner.
- Fitting: fit the stop end according to the system's jointing method and press it fully home, including around the bead.
- Supporting: hang the last bracket close to the gutter end.
Product specifications
| Property | Value |
|---|---|
| Type | Half-round gutter stop end |
| Version | Right |
| Size | 125 mm |
| Material | PVC |
| Colour | Grey |
| Volume | 1 piece |
For beginners
Beginner
This is the end piece for the right side of your round half-round gutter. It must close tightly around the rolled edge at the front, otherwise it will leak there.
- Tools
- Fine-toothed saw
- Sandpaper
- PVC cleaner
- Also needed
- pvc-kraalgoot-125mm-400m
- pvc-kraalgoot-einduitloop-links-125mm
- How to calculate
- You buy this stop end per piece.
- Common mistake
- Not pressing the stop end fully home around the bead edge. After fitting, check with water whether the front stays dry.
PVC half-round gutter stop end right 125mm
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
How do I tell whether my half-round gutter needs a stop end left or right?
Stand outside in front of the gutter and look at it. The right end gets a stop end right, the left end a stop end left.
Can I replace a 125 mm stop end right on its own?
Yes, if your gutter is a 125 mm half-round gutter. Remove the old stop end, clean and degrease the gutter end and fit the new stop end.
Why is my stop end leaking at the bead edge?
Often the stop end does not seal fully there or the gutter was not free of grease. Clean everything and refit the stop end, pressed fully home.