Click the image to see the section size and grain
| Brand | Houthandel Jan Sok |
|---|---|
| Finish | Grijs |
| Material | polyvinylchloride |
| Volume | 1 piece |
| Stock | 100 in stock |
Product description
This collar piece Ø40 is the separate inlet part of the universal trap Ø40, the trap size you often find under a shower or washbasin or at a washing machine connection. The collar piece, also called an inlet sleeve, forms the passage through which the waste outlet of the fixture connects to the trap. The part is made of plastic and supplied separately, so in the event of damage or a renovation you do not immediately have to replace the whole trap. On a 40 mm trap that gets a lot of use, such as on a washing machine, the inlet can be damaged by vibration or incorrect fitting. A new collar piece quickly solves the problem. If you like, combine it with a new cap seal ring Ø40, and the trap is sealed completely fresh again. Collect the part at Celsius 10 in Meppel or have it delivered to your home via the Houthandel Jan Sok webshop.
Key features
- Size Ø40 mm: for the universal trap Ø40.
- Plastic design: light, moisture-resistant and easy to fit.
- Separately replaceable: no sawing needed on a solvent-welded trap.
- Also called an inlet sleeve: the inlet collar the waste outlet of the fixture goes into.
Applications
For use with:
- A damaged trap inlet under a shower or washbasin.
- Reconnecting a washing machine waste.
- Bathroom or utility room maintenance where you reuse the trap.
Fits
This collar piece is intended for:
- The ABS universal trap Ø40.
- Shower, washbasin and washing machine wastes on a 40 mm pipe.
- Use together with the cap seal ring Ø40 for a complete overhaul.
Fitting
- Empty the trap: open the screw cap and catch the water.
- Dismantle: remove the old collar piece and any remaining sealant.
- Clean: make the connection clean and dry.
- Fit: place the new collar piece and reconnect the waste outlet of the fixture.
- Test: run water through the fixture and check for leaks.
Product specifications
| Property | Value |
|---|---|
| Diameter | Ø40 mm |
| Suitable for | universal trap Ø40 |
| Volume | 1 piece |
For beginners
Beginner
This is the part of a 40 mm trap that the waste from your shower, washbasin or washing machine goes into. If it is broken or leaking, you replace just this little piece. Measure the pipe diameter first so you know for sure that 40 mm is right.
- Tools
- Bucket
- Cloth
- Tape measure or calliper
- Also needed
- abs-universele-sifon-40
- dekselring-40
- How to calculate
- You buy this per piece.
- Common mistake
- The water is not drained from the trap first, so it runs over the floor during dismantling. Always open the cap over a bucket first.
Collar piece for universal trap Ø40
Delivery and pickup
-
Pickup in Meppel: Free (ready after confirmation)
-
Truck delivery with a Moffett: €125 fixed delivery charge
-
Free delivery on orders from €2,500
Cut-to-size or custom-processed timber is non-returnable. Stock lengths: see returns policy.
Frequently asked questions
Does the collar piece Ø40 fit every 40 mm trap?
No, it is intended for the universal trap Ø40 from this range. It does not always fit traps from other systems.
What is the difference between a collar piece and a cap seal ring?
The collar piece is the inlet that the waste outlet of the fixture connects to. The cap seal ring is the rubber seal under the screw cap.
How do I know whether my trap is 40 mm?
Measure the outside diameter of the waste pipe that connects to the trap. If it is 40 mm, you need this collar piece.